MULTIQUIP SP403030 Specifications download pdf (Page 44)

PAGE 44 — MQ SP4030 SAW • OPERATION MANUAL — REV. #0 (01/22/09)

Replacing the Battery

1. Remove rear access panel.

2. Disconnect both negative battery cables first, then

disconnect both positive battery cables to prevent

arcing.

3. Remove top battery retainer clip (Figure 43, Item A).

4. Remove lower battery retainer (Figure 43, Item B).

5. Carefully slide battery out of tray. Dispose of properly

in accordance with ordinances and regulations in your

area.

6. Install new battery in tray.

7. Install lower battery retainer. Push retainer tightly

against battery and tighten bolt.

8. Install top battery retainer clip.

9. Reconnect both positive cables first, then both negative

cables to prevent arcing.

MAINTENANCE

Figure 42. Battery Location

Figure 43. Battery Tray and Retainer Clips

Removable Guards and Access Panels

For ease of service access, the guards and access panels

shown in Figure 44 are removable.

1. Blade Guard

2. Rear Access Panel

3. Console Access Panel

4. Belt Guard

5. Flange Guard

6. Engine Guard

Figure 44. Guards & Panels

WARNING — Replace guards and panels

Replace guards and panels prior to starting the engine.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 59 60

No comments

MULTIQUIP SP403030 Specifications Page 44