MULTIQUIP SP403030 Specifications download pdf (Page 38)

PAGE 38 — MQ SP4030 SAW • OPERATION MANUAL — REV. #0 (01/22/09)

LOADING, UNLOADING AND TRANSPORTING THE

SAW

Loading and Unloading

Tie-Down Points

The saw is provided with holes at each corner of the lower

frame for easy tie-down during transportation. See Figure 32.

LOADING AND TRANSPORTING

WARNING

When LOADING, UNLOADING, or when on a STEEP

SLOPE, the engine MUST BE at 1800 RPM or above

to prevent loss of control.

CAUTION

NEVER tie the back end of the saw down by strapping

across the handlebars.

CAUTION

The use of tie-downs to secure the saw during

transportation is highly recommended. ALWAYS secure

the saw during transportation to prevent unwanted

movement or shifting that could result in equipment

damage or injury to personnel.

WARNING

AVOID INJURY!

Stay clear of the saw while it is being hoisted.

To avoid possible damage to the saw, use approved

rigging (minimum 3000 lb. test) when hoisting the saw.

Figure 32. Tie-Down Points

Figure 33. Lifting Point

Figure 34. Night Light

Lifting Point

The convenient single point for lifting the saw with a hoist is

located above the engine (Figure 33).

Night Light

The night light, (Figure 34),can be used on either side of the

saw and can be extended and rotated for best illumination of

the cutting area. Aim the light then lock it in position by

tightening the lock knobs. The light can be removed for storage

by loosening the lock knobs, disconnecting the light cord and

sliding the light bar out of the saw.

To turn Lights ON, push the rocker-style switch located on the

instrument panel forward. To turn Lights OFF, push rocker switch

backward.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 59 60

No comments

MULTIQUIP SP403030 Specifications Page 38