MULTIQUIP SP403030 Specifications download pdf (Page 10)

PAGE 10 — MQ SP4030 SAW • OPERATION MANUAL — REV. #0 (01/22/09)



Whenever necessary, replace nameplate, operation and

safety decals when they become difficult to read.



ALWAYS check the equipment for loosened threads or

bolts before starting.



NEVER touch the hot exhaust manifold,

muffler or cylinder. Allow these parts to cool

before servicing engine or pump.



ALWAYS allow the engine to cool before adding fuel or

performing service and maintenance functions. Contact

with

hot

components can cause serious burns.



NEVER operate this equipment in any enclosed or narrow

area where free flow of the air is restricted. The engine

of this equipment requires an

adequate free flow of cooling

air. If the air flow is restricted

it will cause serious damage

to the equipment or engine

and may cause injury to

people and property.

Remember the engine gives

off DEADLY gases.



ALWAYS refuel in a well-ventilated area, away from

sparks and open flames.



ALWAYS use extreme caution when working with

flammable liquids. When refueling, stop the engine and

allow it to cool.



DO NOT smoke around or near the

equipment. Fire or explosion could result

from fuel vapors, or if fuel is spilled on a

hot engine.



NEVER operate the equipment in an

explosive atmosphere or near combustible

materials. An explosion or fire could result

causing severe

bodily harm or even

death.



AVOID wearing jewelry or loose fitting clothing that may

snag on the controls or moving parts. This can cause

serious injury.



Make certain the operator knows how to and is capable

of turning the engine OFF in case of an emergency.



DO NOT top-off fuel tank. Topping-off is dangerous as it

causes fuel to spill.

GENERAL SAFETY



DO NOT operate or service this equipment

before reading this entire manual.



This equipment should not be operated by persons under

18 years of age.



NEVER operate this equipment without proper protective

clothing, shatterproof glasses, steel-toed boots and other

protective devices required by the job.



NEVER operate this equipment when not

feeling well due to fatigue, illness or when

under medication.



NEVER operate this equipment under the

influence of drugs or alcohol.



NEVER disconnect any

“emergency or safety devices.”

These devices are intended for operator safety.

Disconnection of these devices can cause severe injury,

bodily harm or even death! Disconnection of any of these

devices will void all warranties.



NEVER use accessories or attachments that are not

recommended by Multiquip for this equipment. Damage

to the equipment and/or injury to user may result.



Manufacturer does not assume responsibility for any

accident due to equipment modifications. Unauthorized

equipment modification will void all warranties. Any

modification which could lead to a change in the original

characteristics of the machine should be made only by

the manufacturer who shall confirm that the machine is

in conformity with appropriate safety regulations.

WARNING — Read This Manual

Failure to follow instructions in this manual may lead to

serious injury or even

DEATH!

This equipment is to be

operated by trained and qualified personnel only! This

equipment is for industrial use only.

RULES AND REGULATIONS

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 59 60

Comments to this Manuals

No comments

MULTIQUIP SP403030 Specifications Page 10

Comments to this Manuals

Related products and manuals for Mitre saws MULTIQUIP SP403030