MULTIQUIP MDR-9DYE User Manual download pdf (Page 19)

MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV. #0 (12/19/03) — PAGE 19

CHECKING HYDRAULIC SYSTEM

1. Check the oil tank level gauge (Figure 10). Oil level

should be at the middle indication of the gauge or

higher. Fill as required

2. Check the surroundings of the oil tank, hydraulic

pump and motor for oil leakage.

ALWAYS keep hands and fingers away from

pinch points. DO NOT allow anyone to reach in

on dangerous sections of the machine to avoid

any accidents.

DANGER

CHECKING THE V-BELT

1. Check all bolts and screws and make sure all are

securely tightened.

2. Check V-belt for proper tension. The normal slack

should be approximately 1/8 inch (3 to 5 mm) when

the belts are forcibly depressed between the two

sheaves (Figure 11). Insufficient tension causes

weak vibration and machine damage.

CHECKING THE CLUTCH BOX OIL LEVEL

1. Check clutch box for any oil leakage.

2. Remove the level plug and check oil level (Figure 12).

3. Add oil if necessary.

Figure 10. Hydraulic System Oil Level Gauge

Figure 11. V-Belt Tension

Figure 13. Vibrator Oil Level Check

CHECKING THE VIBRATOR OIL LEVEL

1. Remove the red filler plug and the oil level inspection hole

plug from the vibrator case (Figure 13).

2. Fill with oil until oil overflows from inspection hole.

MDR-9DYE — INSPECTION

Figure 12. Clutch Box Oil Level Check

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 89 90

No comments

MULTIQUIP MDR-9DYE User Manual Page 19