MULTIQUIP MDR-9DYE User Manual download pdf (Page 16)

PAGE 16 — MQ-MIKASA MDR-9DYE VIBRATORY ROLLER — PARTS & OPERATION MANUAL — REV. #0 (12/19/03)

MDR-9DYE — VIBRATORY ROLLER COMPONENTS

Figure 6. MDR-9DYE Vibratory Roller

Components

Figure 6 illustrates the location of the major components

for the MDR-9D Vibratory Roller. The function of each

component is described below:

1. Handle Bar – When operating the roller, this handle is to

be in the downward position. When the roller is to be

stored

, move the handle bar to the upright position.

2. Hand Grip – When operating the roller, use this hand grip

to maneuver the roller. Also has dead man device, when

pressed or hit while traveling in reverse, causes the travel

lever to return to neutral position to stop the machine.

3. Travel Lever –

Push

the lever forward, the roller will move

in a forward direction,

pull

the lever backwards, the roller

will move in backwards direction. Placing the lever in the

middle (midway) will cause the roller not to move (neutral).

4. Vibrator Lever – Turns the vibration on and off.

5. Hydraulic Oil Tank/Cap – Stores hydraulic fluid. Open cap

to fill with recommended hydraulic oil (Shell Tellus #46).

6. V-Belt Cover – Remove this cover to gain access to the

v-belts. NEVER run the vibratory roller without the v-belt

cover. If the v-belt cover is not installed, the possibility exist

that your hand may get caught between the v-belt and clutch,

thus causing serious injury and bodily harm.

7. Engine – This vibratory roller uses a YANMAR L100EE-

DEVMK2 diesel engine. Refer to the owner’s manual for

engine information and related topics.

8. Vibrator Lever (on the body of machine) – Turns the

vibration on and off.

9. Water Tank – Holds 6 gallons (23 liters) of water for the

sprinkler system.

10. Shock Absorber -

11. Scraper Bar – This bar helps prevent buildup of material

between the drum and the frame.

12. Vibration Rollers – 18-inch diameter steel drums that

provide the compaction force in the compaction and

patching of asphalt-type surfaces.

13. Checking Cover for Chains – Take off the cover to check

and lubricate chains.

14. Water Valves– Turn on the water sprinkling system.

15. Hydraulic Oil Gauge – Indicates the hydraulic oil level.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 89 90

Comments to this Manuals

No comments

MULTIQUIP MDR-9DYE User Manual Page 16

Comments to this Manuals

Related products and manuals for Engine MULTIQUIP MDR-9DYE