MULTIQUIP GB2000 Specifications download pdf (Page 26)

PAGE 26 —GB2000 BALLOON LIGHT• OPERATION AND PARTS MANUAL — REV. #3 (08/30/12)

TYPE 2 SETUP (S/N G1900119 AND ABOVE)

JUNCTION BOX MOUNTING

1. Secure the junction box (Figure 19) to the adapter plate

using the supplied bolts (2), lock washer (2), and ﬂat

washer (2). Tighten mounting bolts securely.

Figure 19. Junction Box Mounting

BOLT

(2)

LOCK

WASHER (2)

FLAT

WASHER

(2)

JUNCTION BOX

LAMP

ADAPTER

PLATE

T-BAR

POLE

LAMP MOUNTING

1. Place the GB2000 lamp ﬁxture onto the lamp adapter

plate pole as shown in Figure 20.

2. Insert locking pin into hole opening on pole, then insert

cotter pin to lock pin in place.

FAN POWER CABLE CONNECTION

1. Insert the 38 ft. (11.5 meters), 3-prong AC power plug

on the fan power cable as shown in Figure 20 into the

GFCI power receptacle on the generator.

2. Connect the other end of the fan power cable (quick

disconnect end) to the 3-pin AC power receptacle on

the junction box.

BALLOON POWER CABLE

1. Connect the balloon power cable (Figure 20) to the

10-pin receptacle on the junction box.

NOTICE

Once the tower is raised and in position, the fan power

cable should be secured in such a way as to prevent

tripping and entanglement.

Figure 20. Fan/Balloon Power Cable Connections

LAMP 1

LAMP 3

LOCKING

BALLOON FIXTURE

FAN

POWER

CABLE

JUNCTION

BOX

COTTER

GFCI

LAMP 2

(TOP)

(BOTTOM)

LAMP 4

(TOP)

2 FT. (10 PIN)

BALLOON

POWER CABLE

PLATE

ADAPTER

POLE

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 51 52

Comments to this Manuals

No comments

MULTIQUIP GB2000 Specifications Page 26

Comments to this Manuals

Related products and manuals for Work lights MULTIQUIP GB2000