Multiquip CA4HM User Manual download pdf (Page 15)

CA4HM WALK-BEHIND TROWEL — OPERATION MANUAL — REV. #3 (10/28/10) — PAGE 15

Figures 2 shows the location of the basic controls or components,

for the

CA4HM TROWEL

. Listed below is a brief explanation of

each control or component

1. Quick Pitch™ Control Handle – To adjust the pitch of

the blades, grasp the handle then squeeze and either move

the handle forward or backward to achieve the desired

blade pitch.

2. Throttle Control Lever – Controls the speed of the engine.

Move the hand lever towards the operator to increase

engine speed (high), away from the operator to decrease

engine speed (low).

3. Hand Grip/Handle Bar – When operating the trowel, place

both hands on each grip to maneuver the trowel. Replace

hand grips when they become worn or damaged.

4. Clutch Lever - Clutch engagement lever. When this lever

is engaged, the blades will begin to rotate.

5. Clutch Lever Retainer- Assists the operator in holding

down the clutch lever.

7. Trowel Arm – NEVER operate the trowel with a bent, broken

or out of adjustment trowel arm. If the blades show uneven

wear patterns or some blades wear out faster than others,

the trowel arm may need to be replaced.

8. Blades – This trowel is equipped with special combination

blades. Designed specifically for edging. In addition float

discs can be attached to the trowel arms that will allow the

trowel to float on "

wet

" concrete.

9. V-Belt Cover – Remove this cover to gain access to the V-

belt. NEVER operate the trowel with this cover removed.

10. T-Handle Release Knob – Turn this handle counter-

clockwise to release the upper handle and place in either

down position or operate position. Turn handle clockwise

to lock upper handle in place.

11. Engine – This trowel uses a Honda GX120 4 H.P. gasoline

engine.

Figure 2. Controls and Components

6. Rotating Guard Ring- NEVER put hands or feet inside

guard ring. NEVER attempt to llift trowel by the guard ring.

COMPONENTS

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 35 36

Comments to this Manuals

No comments

Multiquip CA4HM User Manual Page 15

Comments to this Manuals

Related products and manuals for Equipment Multiquip CA4HM