MULTIQUIP Chainsaw ONE-WAY PLATE COMPACTOR User Manual download pdf (Page 17)

MVC77 PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #4 (1/14/11) — PAGE 17

1. Place the

fuel valve lever

(Figure 9) in the "ON" position.

Figure 9. Fuel Valve Lever

2. Place the

Engine ON/OFF switch

(Figure 10) in the "ON"

position.

Figure 10. Engine ON/Off Switch

3. Place the

Choke Lever

(Figure 11) in the "OPEN" position.

Nnnn

Figure 11. Choke Lever

4. Place the

throttle lever

(Figure 12) halfway between

fast

and

slow

Figure 12. Throttle Lever

5. Grasp the starter grip (Figure 13) and slowly pull it out. The

resistance becomes the hardest at a certain position, corre-

sponding the compression point. Rewind the rope a little from

that point and pull out sharply.

Figure 13. Starter Grip

STARTUP

DO NOT attempt to run the compactor until the Safety

Information and Startup sections have been read.

CAUTION

NOTICE

The CLOSED position of the choke lever enriches the

fuel mixture for starting a COLD engine. The OPEN

position provides the correct fuel mixture for normal

operation after starting, and for restarting a warm engine.

DO NOT pull the starter rope all the way to the end.

DO NOT release the starter rope after pulling. Allow it to

rewind as soon as possible.

CAUTION

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 71 72

No comments

MULTIQUIP Chainsaw ONE-WAY PLATE COMPACTOR User Manual Page 17