MULTIQUIP FCG1-6HA Specifications download pdf (Page 27)

FCG16HA SAW • OPERATION AND PARTS MANUAL — REV. #1 (03/19/10) — PAGE 27

OPERATION

Restarting After Intervention

If cutting is interrupted where the engine stops or is turned off

while the blade is still in the cut:

a. Turn engine Shutdown switch (next to the handle lock)

to the "OFF" position.

b. Raise the blade out of the cut

c. Restart the engine as described in the Start-Up sections

on page 24.

If cutting is interrupted where the blade is stuck in the cut:

a. Turn engine Shutdown switch (next to the handle lock)

to the "OFF" position.

b. Remove the blade guard.

c. Remove blade mounting bolt and outer flange.

d. Maneuver the saw away from the stuck blade.

e. A parallel cut made next to the blade may be necessary

to free it.

f. Once the blade is freed inspect the blade for damage;

discard if damaged.

e Ensure an undamaged, useable blade is installed on

the saw before cutting is resumed with that saw.

The only acceptable method for freeing a stuck blade is to

remove the saw from the stuck or pinched blade. DO

NOT try to get the blade unstuck using the Raise/Lower

system or by lifting the saw by the lifting bale, etc.

CAUTIONCAUTION

CAUTION

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 83 84

No comments

MULTIQUIP FCG1-6HA Specifications Page 27