Multiquip MVH408DZ User Manual download pdf (Page 30)

PAGE 30 — MVH408DZ PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV. #0 (04/24/14)

MAINTENANCE

BATTERY

The standard battery installed is a maintenance-free

battery. It is not necessary to supply battery ﬂuid. In case

of a sudden voltage drop, the battery cannot be charged

quickly, so it has to be replaced with a new one.

Checking Battery Capacity

1. Check the battery checker on the hour tachometer

(Figure 32).

Figure 32. Battery Check

2. When the battery charge gets low, the battery checker

lights red.

Changing the Battery

1. Unlatch the two stoppers at the top portion of the rear

cover to open the rear cover (Figure 33).

Figure 33. Opening Rear Cover

NOTICE

Battery is not included with this machine.

DIESEL

ENGINE TACH

&HOUR

METER

Battery checker

HOUR TACHOMETER

NOTICE

If an old battery is used, even when the battery checker

is not lighted (indicating low charge), the cell starter

might not operate because of low charging level. If that

happens, change the battery with the new one.

Rear cover

Stopper

2. Loosen the two bolts on each side of the bar connecting

the battery to the side rails (Figure 34)

Figure 34. Raising The Battery

3. Slide the bar up the notches for easy access to the

battery and tighten the bolts.

4. Take off the nuts and remove the battery holder

(Figure 35).

5. After tilting the battery backward, disconnect the

battery terminal. Always disconnect the black terminal

on the negative side ﬁrst.

6. Pull up the handle on the top of the battery to remove

the battery from the machine.(Figure 35). Make sure

that the battery terminals do not touch the frame.

SLIDE BAR UPWARD

TO ACCESS

BATTERY

LOOSEN

BOLT

(4 PLACES)

BATTERY

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 107 108

Comments to this Manuals

No comments

Multiquip MVH408DZ User Manual Page 30

Comments to this Manuals

Related products and manuals for Equipment Multiquip MVH408DZ