Multiquip MVH408DZ User Manual download pdf (Page 21)

MVH408DZ PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV. #0 (04/24/14)— PAGE 21

STARTUP

Recoil Start

1. Insert the key to the key switch.

2. Move the throttle lever (Figure 11) to the idle position.

3. Turn the key to the "Run" position (Figure 12). The

buzzer sounds.

4. After "HA" is displayed on the hour tachometer, the

display will change immediately to "cumulative time"

5. Grasp the starter grip (Figure 15) and slowly pull it

out. The resistance becomes the hardest at a certain

position, corresponding the compression point. Rewind

the rope a little from that point and pull out sharply.

Figure 15. Starter Grip

6. When engine starts, release the starter grip and allow

the rope to recoil.

7. After the engine has started, warm up the engine at low

speed for 2 to 3 minutes, especially in cold weather.

8. Before the compactor is placed in to operation, run the

engine for several minutes. Check for fuel leaks, and

noises that would associate with a loose component.

NOTICE

DO NOT pull the starter rope all the way to the end.

DO NOT release the starter rope after pulling. Allow it

to rewind as slow as possible.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 107 108

No comments

Multiquip MVH408DZ User Manual Page 21