Multiquip MTX80SF User Manual download pdf (Page 12)



COMPONENTS

Figure 1. MTX80SF Rammer

Figure 1 shows the location of the controls and components

for the MTX80SF Tamping Rammer. The functions of each

control is described below:

1.  — Used to adjust

engine speed (rpm). Move lever forward (SLOW) to

reduce engine speed, move lever back toward operator

(FAST) to increase speed. Always operate the rammer

at full speed (rpm).

2. — To operate rammer, GRIP handle assembly

ﬁrmly on both sides.

3. — Remove this cap to add unleaded

gasoline to the fuel tank. Make sure cap is tightened

securely. DO NOT over ﬁll.

4. — Used to lift rammer for transporting.

5. — Protects the air cleaner which

prevents dirt and other debris from entering the engine.

6. — Allows rammer to be moved around easily

by rolling the unit.

7. — Reservoir for oil bath.

— Laminated wood with tempered steel plate for

superior shock absorption.

— Holds the fuel for the unit (up to 2.7

quarts).

10.  — Reduces the noise of the engine when

running.

11.  — This unit uses a Robin ER120D45010

gasoline engine.

12.

— Indicates the level of oil in

the oil bath reservoir.

13. — Open this valve to remove oil from the

bellows.



Adding fuel to the tank should be

accomplished only when the engine is

stopped and has had an opportunity to

cool down. In the event of a fuel spill, DO

NOT attempt to start the engine until the

fuel residue has been completely wiped up, and the

area surrounding the engine is dry.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 57 58

Comments to this Manuals

No comments

Multiquip MTX80SF User Manual Page 12

Comments to this Manuals

Related products and manuals for Equipment Multiquip MTX80SF