MULTIQUIP QP-3TY Specifications download pdf (Page 14)

QP3TY TRASH PUMP — OPERATION AND PARTS MANUAL — REV. #2 (11/15/10) — PAGE 15

QP3TY — BASIC ENGINE

ENGINE COMPONENTS

Figure 4 illustrates the location of the major components of the

engine. Each component is described below:

1. Fuel Filler Cap – Remove this cap to add diesel fuel to the

fuel tank. Make sure cap is tightened securely. DO NOT

overfill.

2. Fuel Tank – Capacity is 3.5 quarts (3.3 liters) of diesel

fuel.

3. Air Cleaner – Prevents dirt and other debris from entering

the fuel system. Remove wing-nut on top of air filter

cannister to gain access to filter element.

4. Muffler – Used to reduce noise and emissions.

5. Recoil Starting Handle (pull rope) – Used to start engine.

6. Recoil Starter – Manual-starting method. Pull the starter

grip until resistance is felt, then pull briskly and smoothly.

7. Oil Filler Cap / Dipstick – Remove this cap to add oil to the

engine crankcase. Read dipstick to determine if oil level is

low. DO NOT overfill.

8. Oil Drain Plug – Unscrew plug to drain oil from engine

crankcase. Dispose of oil in a safe manner.

9. Decompression Lever – Press down before starting

engine. To prevent damage to engine, DO NOT use for any

other purpose.

10. Fuel Cock – Controls the flow of diesel fuel to the carburetor.

Must be in the ON position when starting and running the

engine.

Figure 4. Engine Controls and Components

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 53 54

No comments

MULTIQUIP QP-3TY Specifications Page 14