MULTIQUIP QP40TH Specifications download pdf (Page 9)

QP40TH — PARTS & OPERATION MANUAL — REV. #1 (10/01/02) — PAGE 9

RULES FOR SAFE OPERATION

■

NEVER Run engine without air cleaner. Severe engine

damage may occur.

■

ALWAYS read, understand, and follow procedures in

Operator’s Manual before attempting to operate equipment.

■

ALWAYS be sure the operator is familiar with proper safety

precautions and operation techniques before using pump.

■

ALWAYS store equipment properly when it is not being used.

Equipment should be stored in a clean, dry location out of the

reach of children.

■

NEVER leave the pump unattended, turn off engine when

unattended.

■

Unauthorized equipment modifications will void all

warranties.

■

NEVER pump volatile, explosive, flammable or low flash

point fluids. These fluids could ignite or explode.

■

NEVER operate the pump in an

explosive

atmosphere.

■

Before starting the pump, check that the clean-out cover is

securely fasten.

■

ALWAYS ensure pump is on level ground before use.

■

Become familiar with the components of the pump before

operating.

■

ALWAYS replace any worn or damaged warning decals.

■

NEVER pump corrosive chemicals or water containing toxic

substances. These fluids could create serious health and

environmental hazards. Contact local authorities for

assistance.

■

NEVER open the priming plug when pump is hot. Hot water

inside could be pressurized much like the radiator of an

automobile. Allow pump to cool to the touch before loosening

plug.

■

NEVER open the pump housing during operation or start the

pump with the clean-out cover removed. The rotating impeller

inside the pump can cut or sever objects caught in it.

■

NEVER block or restrict flow from discharge hose. Remove

kinks from discharge line before starting pump. Operation

with a blocked discharge line can cause water inside pump

to overheat.

■

ALWAYS fill the pump casing with water before starting the

engine. Failure to maintain water inside the pump housing

will cause severe damage to the pump.

■

In winter drain water from pump housing to prevent freezing.

■

High Temperatures – Always stop engine and allow the

engine to cool before adding fuel, oil or performing service

and maintenance functions. Contact with

hot

components can

cause serious burns.

■

NEVER disconnect any

"emergency or safety devices"

These devices are intended for operator safety. Disconnection

of these devices can cause severe injury, bodily harm or even

death! Disconnection of any of these devices will void all

warranties.

Maintenance Safety

■

NEVER lubricate components or attempt service on a running

machine.

■

ALWAYS allow the machine a proper amount of time to cool

before servicing.

■

Keep the machinery in proper running condition.

■

Fix damage to the machine immediately and always replace

broken parts, or missing decals.

■

Dispose of hazardous waste properly. Examples of potentially

hazardous waste are used motor oil, fuel and fuel filters.

■

DO NOT use food or plastic containers to dispose of

hazardous waste.

■

DO NOT pour waste, oil or fuel directly onto the ground,

down a drain or into any water source.

Emergencies

■

ALWAYS know the location of the

nearest

fire extinguisher

■

ALWAYS know the location of the nearest

first aid kit

■

In emergencies

always

know the location of the

nearest phone or

keep a phone on the job site

Also know the phone numbers of the nearest

ambulance

doctor

and

fire department

. This

information will be invaluable in the case of an

emergency.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 69 70

Comments to this Manuals

No comments

MULTIQUIP QP40TH Specifications Page 9

Comments to this Manuals

Related products and manuals for Trash Compactor MULTIQUIP QP40TH