Multiquip MVH206D User Manual download pdf (Page 16)

PAGE 16 — MVH206D PLATE COMPACTOR • OPERATION AND PARTS MANUAL — REV. #1 (10/25/11)

INSPECTION

Before Starting

1. Read safety instructions at the beginning of manual.

2. Familiarize yourself with the operating and

control elements of the machine and the

working environment. This includes

obstacles in the working area, bearing

capacity of the ground and the necessary safety

provisions.

3. Check the air filter for dirt and dust. If air filter is dirty,

replace air filter with a new one as required.

4. Check fastening nuts and bolts for tightness. Loose

threads may cause damage to the machine when

vibrating.

5. Understand the geographical features and regulations

of the job site.

6. Clean the compactor, removing dirt and dust.

Particularly, the bottom of the plate, engine cooling air

inlet.

Checking Engine Oil Level

1. To check the engine oil level, place the compactor on

secure level ground with the engine stopped.

2. Remove the dipstick from the engine oil filler hole

(Figure 4) and wipe it clean.

3. Insert and remove the dipstick without screwing it into

the filler neck. Check the oil level shown on the dipstick.

4. If the oil level is low (Figure 5), fill to the edge of the oil

filler hole with the recommended oil type (Table 4).

WARNING — Lethal Gas Exhaust Hazard

NEVER operate the compactor in a

confined area or enclosed area structure

that does not provide ample

free flow of

air.

CAUTION — Eye and Hearing Hazards

ALWAYS wear approved eye and hearing

protection when required.

Maximum oil capacity is 1.2 quarts (1.10 liters).

Checking the Hydraulic Oil Level

1. To check the engine oil level, place the compactor on

secure level ground with the engine stopped.

2. Remove the hydraulic oil breather cap located at the

top of the hydraulic oil tank (Figure 6).

3. Using a 24 mm wrench, remove the hydraulic oil filler

plug.

epyTliO.4elbaT

nosaeS erutarepmeT epyTliO

remmuS rehgiHroC°52 03-W01EAS

llaF/gnirpS C°01~C°52

-W01EAS

02/03

retniW rewoLroC°0 01-W01EAS

Figure 5. Engine Oil Level

Figure 4. Engine Oil Dipstick Removal

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 71 72

Comments to this Manuals

No comments

Multiquip MVH206D User Manual Page 16

Comments to this Manuals

Related products and manuals for Equipment Multiquip MVH206D