MULTIQUIP MQ62TDD User Manual download pdf (Page 20)

PAGE 20 — MQ62TDD TRASH PUMP • OPERATION AND PARTS MANUAL — REV. #0 (07/30/09)

ENGINE COMPONENTS

Figure 5 illustrates the location of the basic components

for the Deutz engine. The function of each component is

described below:

1. Oil Filter – Replace this filter as recommended in the

maintenance section of this manual

2. Fuel Filter – Replace or clean the fuel pump or fuel

filter as specified in the maintenance section of this

manual.

3. Engine – This pump uses a 29 horsepower air-cooled,

2-cylinder, four stroke Deutz diesel engine. See Deutz

engine owners manual for more detailed information.

4. Oil Filler Port Cap Upper – Remove this cap to add

engine oil to the crankcase. Fill with recommended type

oil as specified in the maintenance section of this

manual.

5. Air Cleaner – Prevents dirt and other debris from

entering the fuel system. Remove wing-nut on top of

air filter cannister to gain access to filter element.

Replace with only manufactures recommended type

air cleaner.

6. Cooling Fan Blades – Make sure that the blades of

the cooling fan are not

bent or broken

. A damaged

fan blade can cause the engine to run hot and overheat.

7. Starter Motor/Solenoid – +12 VDC electrical device

used to engage the flywheel when starting the engine.

8. Fuel Solenoid – Stops the flow of fuel into the injection

system when the ignition key is in the OFF position.

When ignition key is in the ON position fuel will flow

into the injection system.

9. Alternator – Provides power to the electrical system.

Replace with only manufactures recommended type

alternator. s switch will shutdown the engine

10. Fan V-Belt – ALWAYS make sure V-belt is properly

tensioned. A loose or defective V-belt can adversely

affect the performance of the pump.

11. Speed Control Lever – Regulates engine speed.

When pumping always place this lever in the high

engine speed position.

12. Dipstick – Remove dipstick to determine if engine oil

is low. Maintain oil level at the "H "marking on the

dipstick.

NEVER

run engine with low oil.

13. Control Box – Includes ignition switch, reset switch

and engine warning staus indicators.

14. Oil Filler Port Cap Lower – Remove this cap to add

engine oil to the crankcase. Fill with recommended type

oil as specified in the maintenance section of this

manual.

15. Crankcase Drain Plug – Remove this plug to drain

engine oil from the crankcase. Replace with

recommended engine oil as specified in the

maintenance section of this manual.

16. Oil Sending Unit – In the event of low oil in the engine

crankcase or low oil pressure, the indicator lamp will

illuminate. STOP the engine immediately if this occurs.

NEVER run the engine when this lamp is lit.

17. Muffler/Guard – DO NOT

touch the muffler when

engine is running. The muffler can become extremely

hot, causing severe burns. NEVER run the pump with

the muffler guard removed.

Figure 5. Deutz Engine Basic Components

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 115 116

Comments to this Manuals

No comments

MULTIQUIP MQ62TDD User Manual Page 20

Comments to this Manuals

Related products and manuals for Trash Compactor MULTIQUIP MQ62TDD