Multiquip MVH304DSB User Manual download pdf (Page 18)

PAGE 18 — MQ-MIKASA MVH-304DSB PLATE COMPACTOR — PARTS & OPERATION MANUAL — REV. #2 (11/16/05)

MVH-304DSB—OPERATION

Figure 14. Throttle Lever (Fast)

Recoil Start

1. Open the fuel cock (Figure 9).

2. Move the throttle lever to the START position by opening it

to about 20 degrees (Figure 10).

3. Grasp the starter grip (Figure 12) and slowly pull it out. The

resistance becomes the hardest at a certain position,

corresponding to the compression point. Pull the starter

grip briskly and smoothly for starting.

Figure 12. Engine Start Handle

4. Push down decompression lever (Figure 13) and

release.

Make sure to follow all safety rules referenced in

the safety section of this manual before operating

compactor. Keep work area clear of debris and

other objects that could cause damage to the

compactor or bodily harm.

CAUTION :

TRAVELING

Figure 13. Decompression Lever

1. Grasp the compactor's hand grip (Figure 14), and move the

engine throttle lever (Figure 14) quickly to the

fast

position.

2. With the throttle lever in the fast position, the engine speed

should be around 2,300 RPM, therefore engaging the cen-

trifugal clutch

5. If the engine does not start, repeat steps 4 and 5.

NOTE

ALWAYS move the throttle lever

quickly without hesitation, because

increasing the engine speed slowly

causes the clutch to slip.

Figure 15. Direction Lever

3. To make the compactor move in the forward direction push

the travel lever ( Figure 15) forward.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 69 70

No comments

Multiquip MVH304DSB User Manual Page 18