MULTIQUIP MTR40F User Manual download pdf (Page 26)

PAGE 26 — MTR40F RAMMER — OPERATION AND PARTS MANUAL — REV. #3 (01/05/12)

MTR-40F

NPA-910 J

Oil

öl

I’ huile

SAE30

7~9 cc

NPA-961 E

READ OWNER’S SERVICE MANUAL BEFORE OPERATING OR

SERVICING THIS MACHINE.

ALWAYS KEEP UNAUTHORIZED, INEXPERIENCED,

UNTRAINED PEOPLE AWAY FROM THIS MACHINE.

MAKE SURE ALL SAFETY DEVICES ARE OPERATIONAL

BEFORE THIS MACHINE IS STARTED. MAKE SURE ENGINE

IS TURNED OFF AND SPARK PLUG WIRE DISCONNECTED

BEFORE SERVICING THE MACHINE OR COMING IN

CONTACT WITH ANY MOVING PART. IF EQUIPMENT IS

ELECTRICAL PLUG.

NEVER LEAVE MACHINE UNATTENDED WHEN OPERATING.

ALWAYS STOP ENGINE AND ALLOW ENGINE TO COOL

BEFORE ADDING FUEL OR OIL.

NPA-329 J

CLEANING ELEMENT:

Remove the element from the pre-cleaner

Clean the element with solvent

Apply SAE30 motor oil with 7~9 cc, and

squeeze out excess oil before re-installing.

NPA-963 J

3800 ~ 4100 RPM

NPA-957 J

NAMEPLATE

GREASE

NPA-120 J

When you stop

the engine, be

sure to close

the fuel cock

NPA-399 J

PRIMARY AIRFILTER

CHECK DAILY

NPA 1018

SECONDARY AIRFILTER

SERVICE MONTHLY

NPA 1016

To start, switch must be

in the “ ” positionON

NPA 293

GASOLINE ONLY

NPA 1017

Before Operation

Check all nuts and bolts for tightness

Keep machine at the upright operating position to check

1. Give each grease fitting five (5) shots of grease with

a hand grease gun.

2. Check the engine oil level and if the level is low,

it should be refilled from the filler hole.

OPERATION

To START engine:

Open fuel filter valve and close choke lever on carburetor.

Place starter switch to “ON” and pull start rope.

When engine starts, open the choke lever and warm up the

engine for 4-5 minutes before operation.

Then move throttle lever from “OFF” to “ON” to operate.

To STOP engine:

Move the throttle lever quickly from “ON” to “OFF” position.

Then move starter lever quickly to “OFF” and close the fuel filter valve.

NPA-1100 J

Gasoline Only

Bitte nur Benzine einfüllen

Essence Uniquement

Usare solo Benzina

Solo para Gasolina

NPA-896 J

LAY DOWN TOWARD THIS

DIRECTION ONLY

Read operator’s manual carefully before use.

Lire le manuel attentivement avant utilisation.

Bitte lesen Sie vor lnbetriebnahme der Maschine die

bedienungsanleitung sorgältig durch.

Prima delÍ uso leggere attentamente il manuale.

Lee com atenÇão manual de instruÇõ antes de

usar.

Leer detenidamente el manual de instrucciones

antes de usar la maquina.

CAUTION

ATTENZIONE

ATENÇAÕ

PRECAUCION

NPA-769 J

CLEAN THE ELEMENT WITH KEROSENE WHEN DIRTY. AFTER THE

CLEANING, LUBRICATE IT MIXED OIL (KEROSENE 2~4: ENGINE OIL

1), SQUEEZE OUT THE OIL, AND REPLACE IT. AND CLEAN IT MORE

OFTEN WHEN OPERATING IN DUSTY CONDITIONS.

NPA-831 J

NAMEPLATE AND DECALS

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 75 76

Comments to this Manuals

No comments

MULTIQUIP MTR40F User Manual Page 26

Comments to this Manuals

Related products and manuals for Engine MULTIQUIP MTR40F